Service area
Electrostatic Painters in Arnprior
Arnprior sits where the Madawaska River runs into the Ottawa River, and the town still shows its lumber history in the older brick blocks along John Street and the houses on the streets near the water. Downtown storefronts there have aluminum and steel frames, painted metal awnings and service doors in the back lanes. Out toward Highway 417 the picture is newer: industrial units with steel man doors and overhead doors, a growing ring of subdivisions with metal railings, and municipal buildings, schools and an arena full of lockers, steel doors and handrails that take daily wear.
Industrial and institutional metal in Arnprior often needs degreasing before anything else happens, because shop doors and equipment rooms collect oil and grime that will lift paint if it is left behind. Schools and the arena are easiest to schedule during breaks or quiet periods, when a hallway of lockers can be masked off and left to cure without students or skaters brushing past. For homes near the river, the damp air and spring runoff season make late spring through early fall the sensible window for outdoor railings and gates.
Getting to Arnprior
Arnprior is a straight run up Highway 417 for us, and larger jobs there are usually booked as full working days so nothing is left half finished between trips.
Questions from Arnprior
- We run a small industrial unit off the highway. Can you paint the steel doors and frames without shutting us down?
- We can, by working one opening at a time so the rest of the building stays accessible, and the coating is dry to the touch fairly quickly. Doors that see forklift or cart traffic may need a little longer before they take heavy contact.
- Are school lockers a good candidate for electrostatic painting?
- They are one of the most common uses for it. The paint wraps around louvres, edges and handles that are tedious to brush, and the lockers can be refinished where they stand. Booking the work during a school break gives the coating time to cure before the halls fill up again.
- Can you coat the metal railing on a dock or deck by the river?
- We can coat metal railings close to the water as long as they are dry and accessible from the land side. Prep matters more than usual here, because moisture and spring flooding are hard on any finish, so rusty sections get treated and primed before the topcoat goes on.
